Because Spoonflower products are eco-friendly and digitally printed, care expectations may be a bit different from fabrics you buy from a store or other vendor. You will receive basic care instructions for your fabric along with your order, but it is always good to review them. You will learn more about how to care for your fabrics and wallpaper below, from what to expect when you first receive your fabric, what to do after its first wash, and how to care for your items over the course of their life.
It is always a good idea to wash your fabrics before you begin working with them. Washing allows the fibers to shrink or relax back into their normal shape after the printing process. It also accounts for any final shrinkage so that you might avoid small distortions in a finished garment.
For best results, we highly recommend washing your fabrics with a phosphate-free detergent in cool/cold water on a gentle or delicate machine cycle. It is always ideal to wash similar fabric types, and colors, as well. For example, it's best to avoid washing red printed fabrics with mostly white designs.
▶ Natural Fabrics (excluding Belgian Linen™)
Some fading as a result of washing is typical for these fabrics over time. This is most notable on darker shades. The more popular front-loading washers do contribute more to this color loss because of the increased tumbling and agitation during cleaning, but this can be minimized by using cool wash settings and gentle wash cycles.
It is always best to tumble dry on a low temperature or permanent press setting and remove your items promptly so as to avoid wrinkling.
*Belgian Linen: Machine wash warm or cool on a gentle/delicate setting. Machine dry on a low temperature setting. Max temperature for both wash and dry is 100°F (38°C). To prevent wrinkling it is suggested to not fully dry the linen during laundering. Iron on the reverse side of the fabric with steam to help soften. Do not bleach.
▶ Polyester Fabrics
Machine dry using a low temperature or permanent press setting and remove promptly to avoid wrinkles.
NOTE: Because friction from the wash/dry cycle likely causes the edges of any woven fabric to fray, we highly recommend stay-stitching or serging the cut edges prior to washing and drying.
When drying, there should be no concern with using dryer sheets, but you can always test a smaller amount or a Test Swatch before a larger project just to make sure.
Every substrate has the potential to shrink in both length and width during the printing process, and also during your washing cycles at home. Shrinkage amounts will vary from fabric to fabric. More information about estimated shrinkage rates can be found on the individual product pages for each substrate. Link to these pages through Explore Our Products.
NOTE: If you feel that the shrinkage of any of your items has exceeded the estimates published on the individual product page, please contact us with a picture of your item(s), completely unfolded and laid smooth, with a ruler or measuring tape along the edge of the printed design in order to clearly display the length and/or width in question.
- Iron our 100% cotton fabrics using standard settings for cotton. Always iron with the printed side down for best results.
- Iron polyester fabrics with a light touch on a synthetic setting only. Higher iron temperatures may result in color transfer and in extreme cases, melting may occur.
- Steam may be used while ironing to remove wrinkles, but avoid spraying fabric with a water bottle or with water from the iron reservoir. This practice can lead to unexpected staining due to mineral deposits in the water.
NOTE: High temperature settings may cause discoloration or crushing of linen, so we recommend you use synthetic settings and a light touch for Linen Cotton Canvas and Belgian Linen. And always, if there is any doubt, test your iron on an inconspicuous piece of fabric.
Dry cleaning your products is fine, but ask the cleaner if they use the solvent perchloroethylene, also known as 'perc'. The pigment printing on our products will not survive the battle with this chemical.
Spoonflower has not tested any of our substrates with commercial products advertised for stain, water or UV protection. Customers have mentioned luck using a variety of these products, but it would be wise to test a small swatch of your fabric for colorfastness prior to broader application.
Gently wipe with a damp cloth. The use of cleaners and heavily rubbing can cause color to lift.
See Also: Can I return or exchange what I ordered?
See Also: What products do you print on?
See Also: Fabric Specifications and Details